How to maintain and service the High Speed ​​Horizontal Drilling Rig?

Daily maintenance
1. Clean the equipment: After each use, the dirt, oil and debris on the surface of the drilling rig should be removed in time. For key parts, such as drill rods, drill bits, power heads, guide rails, etc., key cleaning should be carried out to prevent impurities from entering the equipment and affecting normal operation.
2. Check the parts: Before and after work every day, check the various parts of the drilling rig. Check whether the connecting bolts are loose, especially the bolts in key parts such as the power head and drill rod connection; check whether the oil pipe and air pipe have leakage. If there is leakage, it should be repaired or replaced in time; check the wear of the wire rope. If it is severely worn, it needs to be replaced in time to avoid safety accidents.
3. Lubricate parts: According to the requirements of the equipment's instruction manual, regularly lubricate the parts that need lubrication. Generally speaking, the power head, guide rails, chains, gears and other parts of the drilling rig need to be regularly coated with lubricating oil or grease to reduce friction, reduce component wear, and ensure the normal operation of the equipment.
4. Clean the cooling system: During the operation of the High Speed ​​Horizontal Drilling Rig, the engine and hydraulic system will generate a lot of heat, which needs to be dissipated by the cooling system. Therefore, it is necessary to regularly clean the radiator in the cooling system and remove dust, oil and other debris on the surface of the radiator to ensure the heat dissipation effect. At the same time, check the level and quality of the coolant and add or replace the coolant in time.
Regular maintenance
1. Replace wearing parts: Regularly replace wearing parts according to the frequency of use and working environment of the equipment. Common wearing parts include drill bits, drill rods, seals, filters, etc. The drill bit will continue to wear during the drilling process. When it is worn to a certain extent, it will affect the drilling efficiency and quality and needs to be replaced in time; the drill rod is also prone to bending, wear, etc., and it needs to be regularly checked and replaced.
2. Maintain the hydraulic system: The hydraulic system is an important part of the High Speed ​​Horizontal Drilling Rig and needs to be maintained regularly. Replace the hydraulic oil and clean the hydraulic oil tank and filter at regular intervals (generally 2000-3000 hours). At the same time, check the working status of hydraulic pumps, hydraulic valves and other components. If there is any fault, repair or replace them in time.
3. Check the electrical system: Regularly check the electrical system of the drilling rig, including wires, cables, sensors, controllers, etc. Check whether the wires are damaged or aged. If so, replace them in time; check the sensitivity and accuracy of the sensors. If there is any deviation, calibrate them; clean the dust inside the controller to ensure good heat dissipation and stable operation.
4. Calibrate the measurement system: The measurement system of the High Speed ​​Horizontal Drilling Rig is crucial to the accuracy of drilling holes, and it should be calibrated regularly. For example, use professional measuring tools to calibrate the angle, depth and other parameters of the guide system to ensure the accuracy of the measurement data.
Special maintenance
1. Long-term parking maintenance: If the drilling rig needs to be parked for a long time, comprehensive maintenance should be carried out. First, clean the equipment thoroughly, and then lubricate and rust-proof each component. For parts that are prone to rust, such as drill rods and guide rails, you can apply anti-rust oil or use anti-rust packaging. At the same time, park the equipment in a dry and ventilated place, and start the equipment regularly and run it for a period of time to prevent rust and aging of the parts.
2. Maintenance after use in harsh environments: If the drilling rig is used in harsh environments (such as high temperature, high humidity, high dust, etc.), special maintenance should be performed after use. After use in a high temperature environment, special attention should be paid to the inspection and maintenance of the cooling system; after use in a high humidity environment, the moisture on the surface of the equipment should be removed in time, and rust-proof treatment should be performed on the parts prone to rust; after use in a high dust environment, the dust inside and outside the equipment should be thoroughly cleaned to prevent dust from entering the equipment and affecting the performance of the equipment.