What are the safety precautions when using the horizontal directional machine?

1. Before construction
Site inspection: Ensure that the ground at the construction site is solid and flat, able to withstand the weight of the horizontal directional machine and the vibration during construction, and prevent the equipment from tilting or sinking. Check the surrounding environment to confirm that there are no obstacles that affect the construction, such as high-voltage lines, underground pipelines, etc. Verify the location and direction of the underground pipelines with relevant departments to avoid damaging the existing pipelines during construction.
Equipment inspection: Conduct a comprehensive inspection of the horizontal directional machine, including the power system, drilling system, guidance system, mud system, etc. Ensure that all components are firmly connected without looseness, damage or leakage. Check whether the safety devices of the equipment are intact and effective, such as emergency brakes, guardrails, protective covers, etc. Check the grounding of the electrical system to ensure good grounding and prevent electric shock accidents.
2. During construction
Operator requirements: Operators must undergo professional training and be familiar with the operating methods and safety regulations of the horizontal directional machine. It is strictly forbidden for untrained personnel to operate the equipment. Operators should concentrate during the construction process and pay close attention to the operating status and construction status of the equipment. It is not allowed to leave the operating position without authorization, and it is strictly forbidden to carry out activities unrelated to construction during the operation.
Drilling process safety: Drilling operations should be carried out strictly in accordance with the operating procedures, and the drilling speed and push-pull force should be controlled to avoid equipment damage or accidents caused by too fast or too violent operation. Once an abnormal situation is found, drilling should be stopped immediately for inspection and treatment. During the drilling process, attention should be paid to maintaining the circulation and pressure of the mud stable to prevent the collapse of the hole wall.
Safety protection: Operators must wear personal protective equipment, such as safety helmets, safety shoes, protective gloves, etc.
During the operation of the equipment, it is strictly forbidden to approach rotating parts and moving parts to prevent mechanical injury accidents.
Set up obvious safety warning signs and prohibit unrelated personnel from entering the construction site.
3. After construction
Equipment shutdown: After the construction is completed, the operation of the equipment should be gradually stopped in accordance with the operating procedures. First turn off the power system, then stop the mud circulation, and finally clean and organize the equipment.
Equipment maintenance: Clean and maintain the horizontal directional machine, check the wear of each component, and replace damaged parts in time.
Perform regular maintenance and inspection of the equipment to ensure that the performance and safety of the equipment are in good condition.
In short, when using a horizontal oriented machine, you must strictly abide by safety regulations, strengthen safety management, and ensure the safety and reliability of the construction process. If you are interested in learning more about the safety precautions of a horizontal oriented machine, please pay attention to www.drilltohdd.com and start an efficient journey. We look forward to working with you and providing tailor-made product solutions for your company.